Known as: wiring harness rear end when required order also: 171.971.519 a

View/Change Diagram

924 1980-85 - Electrical

This 9 inch front and 11 inch rear steel fender flare set is made in Germany, we offer a complete line of replacement bodywork to complement the entire Porsche model range. Sold individually. 1 necessary per car. Please note: for conversions, these flares will allow you to run 9 wide tires in the front and 11 wide in the rear. For the 964 / 965 models the torsion bar cut out must be filled. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Endless ewig n35s racing rear brake pads Porsche Boxster 2.5l 2.7l 97-03

Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.

N35s has a very good initial bite and represents a straighter line between initial bite and brake power. It is easy to control and a special characteristic is that the driver can initiate light braking with a slight touch of the pedal ...(choose a part on the right to read more)

General Fitment

Techart rear fender air ducts GT street Porsche 997 tt 07+

The worlds largest aftermarket Porsche tuner, techart, has this front spoiler for the Porsche 997 turbo.

aero air ducts for rear fenders, steel version with carbon inserts. Sold as a pair.

Vivid racing is an authorized techart distributor and can handle all of your Porsche needs.

General Fitment

Posi quiet brake pads are manufactured using the same positive molding process utilized by original equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad.

By offering a variety of friction compounds, the posi quiet brake pad program boasts the widest application coverage in the automotive aftermarket. The centric posi quiet brake program has a brake pad for every vehicle and driving style.

All posi quiet friction compounds have been specifically formulated to ...(choose a part on the right to read more)

General Fitment

Posi quiet brake pads are manufactured using the same positive molding process utilized by original equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad.

By offering a variety of friction compounds, the posi quiet brake pad program boasts the widest application coverage in the automotive aftermarket. The centric posi quiet brake program has a brake pad for every vehicle and driving style.

All posi quiet friction compounds have been specifically formulated to ...(choose a part on the right to read more)

General Fitment

This seal sits on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this is the thinner width. This is not the thicker width from the SC models.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1974-77 - Body

Posi quiet brake pads are manufactured using the same positive molding process utilized by original equipment suppliers. Positive molding uses extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pad, resulting in even wear and performance characteristics throughout the life of the brake pad.

By offering a variety of friction compounds, the posi quiet brake pad program boasts the widest application coverage in the automotive aftermarket. The centric posi quiet brake program has a brake pad for every vehicle and driving style.

All posi quiet friction compounds have been specifically formulated to ...(choose a part on the right to read more)

General Fitment

Fur alle 996 und 997gt3 und cup modelle, nicht einstellbarer einrohr gasdruck renndampfer mit bilstein enwickelt u.a. Fur teilnehmer des Porsche sportscups

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Introducing the hamann bumper kit. These bumpers are made out of the best lightweight material. Not only are these bumpers light, but they add incredible looks to your vehicle and make people admire your beautiful machine.

Please note: some bumpers include lights and hardware.

General Fitment

Introducing the hamann bumper kit. These bumpers are made out of the best lightweight material. Not only are these bumpers light, but they add incredible looks to your vehicle and make people admire your beautiful machine.

Please note: some bumpers include lights and hardware.

General Fitment

This seal sits on the trailing edge of the front fender at the top just below the windshield. It is also used at the rear fender where it joins the bumper. 4.3 mm in thickness. Sold individually. 4 necessary per car. Driver's or passengers side fitment.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1970-73 - Body	911 1974-77 - Body
911 1978-83 - Body	911 1984-86 - Body
911 1987-89 - Body	911 1987-89 - Body
930 1975-77 - Body	912 1965-69 - Body
911 1965-69 - Body

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1970-73 - Body	912 1965-69 - Body
912 1965-69 - Body	911 1965-69 - Body
911 1965-69 - Body

Window chrome trim fades and pits with time and detracts from your cars appearance. Replace it with this quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. We also recommend replacing entire window trim to achieve a consistent trim appearance. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1970-73 - Body	911 1974-77 - Body
911 1978-83 - Body	912 1965-69 - Body
911 1965-69 - Body

Window chrome trim fades and pits with time and detracts from your cars appearance. Replace it with this quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. We also recommend replacing entire window trim to achieve a consistent trim appearance. Sold individually. 1 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1970-73 - Body	911 1974-77 - Body
911 1978-83 - Body	912 1965-69 - Body
911 1965-69 - Body

This seal sits on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this is the thinner width. This is not the thicker width from the SC models.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1974-77 - Body

Two required per car

View/Change Diagram

356 1950-59 - Body

Endless ewig concept a rear brake pads Porsche 964 turbo 91-92

Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.

Endless ewig brake pads were developed specifically for European cars; this compound has a very low dust emission and very low noise levels. The compound is a non asbestos one.

Technical data:
Temperature range: 0 - 450 degree c

General Fitment

This seal sits on the trailing edge of the front fender at the top just below the windshield. It is also used under the back of the rear quarter panel where it meets the side panel. High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 4 necessary per car. Driver's or passengers side fitment (lhd).

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1978-83 - Body	911 1984-86 - Body
911 1984-86 - Body	911 1987-89 - Body
911 1987-89 - Body	930 1975-77 - Body
930 1975-77 - Body

This seal sits on the trailing edge of the front fender at the cowl just below the windshield. It is also used under the back of the rear quarter panel where it meets the bumper side panel. We also recommend purchasing the left side, part # 91150318501 high-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: this is the thicker width from the SC models.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1978-83 - Body	911 1984-86 - Body
911 1987-89 - Body

This 8 inch fender flare is a steel reproduction of the original 1973 2.7 l rs fender flare. It is not to be confused with those selling the 3.0 l SC flares. This is necessary to achieve a true 2.7 l rs when making a tribute car out of a t, e or if restoring a factory rs. This steel fender flare is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the facto...(choose a part on the right to read more)

View/Change Diagram

911 1970-73 - Body

Vivid racing chooses wald international aerodynamic parts for their top class products designed to improve the appearance and performance of your vehicle. The quality, fitment and design of wald are unmatched in the industry. Constructed of carbon fiber, wald aero kits are both light weight and durable.

Wald international designs its products to compliment the vehicles existing lines, adding unique style with understated class. All wald products are direct fitment designed with specific vehicles in mind. Wald pieces not only add style to your vehicle but also increase efficiency by reducing drag. Increased aerodynamics keep vehicle stable at high speeds and provide better handling characteristics.

...(choose a part on the right to read more)

General Fitment

Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)

Unsure about installing a replacement bushing? Send us your trailing arm and we will properly recondition and install the bushing for you. The reconditioning process includes full inspection of your trailing arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we properly install our rear clubsport trailing arm bushings, part # FVD3310212291. Our rear trailing arm bushings contain rubber inserts with a shore hardness value of 85, like what is used on rennsport models. They offer rs style handling characteristics, superior durability and are still forgiving enough for street use. When reconditioning the trailing arms, we als...(choose a part on the right to read more)

This 8 inch fender flare is a steel reproduction of the original 1973 2.7 l rs fender flare. It is not to be confused with those selling the 3.0 l SC flares. This is necessary to achieve a true 2.7 l rs when making a tribute car out of a t, e or if restoring a factory rs. This steel fender flare is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the facto...(choose a part on the right to read more)

View/Change Diagram

911 1970-73 - Body